| 특수전지
> 백업용 리튬전지
> 3.6V 330mAh (가로형) 단자
|
|
 |
3.6V 330mAh (가로형) 단자 |
 |
|
|
|
| 판매가격 : 7,000원 |
선택
:
|
|
 |
| |
|
|
|
| |
|
|
| |
 |
|
|
|
| |
TECHNICAL INFORMATION
1. APPLICATION
This specification applies to the Ni-MH batteries
Model : 280H3B6H(Mo)
2. CELL AND TYPE
2.1 Cell :Sealed Ni-MH Button Cell
2.2 Type :Button type
2.3 Size type : 3.6V
3. RATINGS
3.1 Nominal voltage : 3.6V
3.2 Nominal capacity : 330mAh/0.2CmA
3.3 Typical weight : 38.0g
3.4 Standard charge : 33mA×14hours
3.5 Rapid charge : 66mA×6hours
Trickle current : 9.9mA
3.6 Discharge cut-off voltage: 3.0V
3.7 Temperature range for operation (Humidity: Max.85%)
Standard charge 0~+45℃
Rapid charge +10~+45℃
Trickle charge 0~+45℃
Discharge -10~+45℃
3.8 Temperature range for storage (Humidity: Max.85%)
Within 2 years -20~+35℃
Within 6 months -20~+45℃
Within a month -20~+45℃
Within a week -20~+55℃
4. ASSEMBLY & DIMENSIONS
Per attached drawing
5. PERFORMANCE
5.1 TEST CONDITIONS
The test is carried out with new batteries (within a month after delivery)
ambient conditions
Temperature: +25±5℃
Humidity: 60±20%
Note 1
Standard charge : 33mA×14hours
Standard discharge : 0.2C to 3.0V
5.2 TEST METHOD & PERFORMANCE
|
Test |
Unit |
Specification |
Conditions |
Remarks |
|
Capacity |
mAh |
≥330 |
Standard
Charge/discharge |
Up to 3 cycles
Are allowed |
|
Open Circuit
Voltage(OCV) |
Voltage
(V) |
≥3.9 |
After 1 hour standard
Charge |
|
|
Internal
Impedance |
mΩ/cell |
≤500 |
Upon fully charge
(1KHz) |
|
|
High rate
Discharge(0.5C) |
Minute |
≥60 |
Standard charge
Before discharge |
|
|
Discharge
Current |
mA |
165 |
Maximum continuous
Discharge current |
|
|
Over charge |
|
No leakage
Not explosion |
9.9mA(0.03C) charge
one year |
|
|
Charge
Retention |
mAh |
264 |
Standard charge;
Storage: 28 days;
Standard discharge |
|
|
Cycle Life |
Cycle |
≥500 |
IEC285(1993)4.4.1 |
|
|
Leakage |
|
No leakage nor
Deformation |
Fully charge at 33mA,
Stand 14 days |
|
Note 2 IEC285(1993)4.4.1 cycle life
|
Cycle number |
Charge |
Rest |
Discharge |
|
1-50 |
33mA for 14h |
|
66mA for 5h |
50 cycles of test as in the following table condition is repeated, The discharge time of the
100th,200th,400th,500th is more than 5 hours. (Ambient temperature is 20±5℃)
5.3 Humidity
The battery shall not leak during the 14 days which it is submitted to the condition
of a temperature of 33±3℃ and a relative humidity of 80±5%
6. OTHERS
6.1 We recommend you to set the cut-off voltage at 1.0V/cell
6.2 If the cut-off voltage is above 1.1V/cell, the battery may be underutilized resulting
insufficient use of the available capacity
6.3 If it is below 1.0V/cell,the battery may have discharge or reverse charge to the cell
7. PRECAUTION
The cells shall be delivered in charged condition. Before testing or using, the cell shall be
discharged at 20±5℃ at a constant current of 0.2CmA to a final voltage of 1.0V/cell.
7.1 Avoid throwing cells into a fire or attempting to disassemble them.
7.2 Avoid short circuiting the cells.
7.3 Avoid direct solidarity to cells.
7.4 Observe correct polarity when connecting.
7.5 Do not charge with more than our specified current.
7.6 Use cells only within the specified working temperature range. 7.7 Store cells in dry and cool place. |
| |
TECHNICAL INFORMATION
1. APPLICATION
This specification applies to the Ni-MH batteries
Model : 280H3B6H(Mo)
2. CELL AND TYPE
2.1 Cell :Sealed Ni-MH Button Cell
2.2 Type :Button type
2.3 Size type : 3.6V
3. RATINGS
3.1 Nominal voltage : 3.6V
3.2 Nominal capacity : 330mAh/0.2CmA
3.3 Typical weight : 38.0g
3.4 Standard charge : 33mA×14hours
3.5 Rapid charge : 66mA×6hours
Trickle current : 9.9mA
3.6 Discharge cut-off voltage: 3.0V
3.7 Temperature range for operation (Humidity: Max.85%)
Standard charge 0~+45℃
Rapid charge +10~+45℃
Trickle charge 0~+45℃
Discharge -10~+45℃
3.8 Temperature range for storage (Humidity: Max.85%)
Within 2 years -20~+35℃
Within 6 months -20~+45℃
Within a month -20~+45℃
Within a week -20~+55℃
4. ASSEMBLY & DIMENSIONS
Per attached drawing
5. PERFORMANCE
5.1 TEST CONDITIONS
The test is carried out with new batteries (within a month after delivery)
ambient conditions
Temperature: +25±5℃
Humidity: 60±20%
Note 1
Standard charge : 33mA×14hours
Standard discharge : 0.2C to 3.0V
5.2 TEST METHOD & PERFORMANCE
|
Test |
Unit |
Specification |
Conditions |
Remarks |
|
Capacity |
mAh |
≥330 |
Standard
Charge/discharge |
Up to 3 cycles
Are allowed |
|
Open Circuit
Voltage(OCV) |
Voltage
(V) |
≥3.9 |
After 1 hour standard
Charge |
|
|
Internal
Impedance |
mΩ/cell |
≤500 |
Upon fully charge
(1KHz) |
|
|
High rate
Discharge(0.5C) |
Minute |
≥60 |
Standard charge
Before discharge |
|
|
Discharge
Current |
mA |
165 |
Maximum continuous
Discharge current |
|
|
Over charge |
|
No leakage
Not explosion |
9.9mA(0.03C) charge
one year |
|
|
Charge
Retention |
mAh |
264 |
Standard charge;
Storage: 28 days;
Standard discharge |
|
|
Cycle Life |
Cycle |
≥500 |
IEC285(1993)4.4.1 |
|
|
Leakage |
|
No leakage nor
Deformation |
Fully charge at 33mA,
Stand 14 days |
|
Note 2 IEC285(1993)4.4.1 cycle life
|
Cycle number |
Charge |
Rest |
Discharge |
|
1-50 |
33mA for 14h |
|
66mA for 5h |
50 cycles of test as in the following table condition is repeated, The discharge time of the
100th,200th,400th,500th is more than 5 hours. (Ambient temperature is 20±5℃)
5.3 Humidity
The battery shall not leak during the 14 days which it is submitted to the condition
of a temperature of 33±3℃ and a relative humidity of 80±5%
6. OTHERS
6.1 We recommend you to set the cut-off voltage at 1.0V/cell
6.2 If the cut-off voltage is above 1.1V/cell, the battery may be underutilized resulting
insufficient use of the available capacity
6.3 If it is below 1.0V/cell,the battery may have discharge or reverse charge to the cell
7. PRECAUTION
The cells shall be delivered in charged condition. Before testing or using, the cell shall be
discharged at 20±5℃ at a constant current of 0.2CmA to a final voltage of 1.0V/cell.
7.1 Avoid throwing cells into a fire or attempting to disassemble them.
7.2 Avoid short circuiting the cells.
7.3 Avoid direct solidarity to cells.
7.4 Observe correct polarity when connecting.
7.5 Do not charge with more than our specified current.
7.6 Use cells only within the specified working temperature range.
7.7 Store cells in dry and cool place.
|
 |
| |
|
 |
 |
|
|
| 고객평가 : 평점 ★★★★★ |
|
|
|
